Bathtub To Shower Conversion

Bathtub To Shower Conversion in Ada, Kansas (KS)

Our Ada crew pulls the idle tub, keeps the alcove, and hands back a shower anywhere in Ottawa County within days.

Price my conversion

Written quote at no cost, one callback, no chasing afterwards.

Population
139
County
Ottawa County
State
Kansas
Region
Midwest
One alcovethe new shower stands exactly where the tub did
About 3 daysfrom the first cut to the first shower
15 inchesof tub rim you will never climb again
Zero dollarsbefore a written price has your yes on it

Upgrading your bathroom space for better living

Are you tired of climbing over a giant porcelain wall just to get clean every morning? Changing your heavy tub into a sleek walk-in basin setup transforms your bathroom experience into something way more practical and enjoyable.

Why this swap makes total sense

Because the tiny town of Ada in Ottawa County has such a quiet vibe, you deserve a home that fits your real needs without any extra stress. Making this change helps you stop worrying about slipping on slick edges while you try to reach the water taps.

Everything about this project focuses on making your daily routine smoother and much safer for your joints. You get a room that feels bigger and looks way more modern without needing to tear down every single wall in the house.

This switch really helps if you find that getting in and out of a deep basin feels like a workout you did not sign up for today. By removing those high barriers, you gain a sense of ease that makes your morning start much better.

Getting the most out of your floor space

Since the population here is only 139 people, your house likely has a unique character that deserves a custom touch. Putting in a level floor surface where that big clunky basin used to sit creates a massive amount of room for you to move around.

Perhaps you never really liked soaking in a tub anyway, so why keep the heavy thing taking up all your precious square footage? Clearing out that old equipment lets you install beautiful tile or stone that looks great and lasts for a very long time.

On top of that, you can add fancy shower heads or built-in benches that provide total serenity during your wash. This upgrade turns a plain bathroom into a place where you actually want to spend time while prepping for your day.

Understanding the construction process

Now, you might wonder how exactly we take out that massive chunk of ceramic and replace it with a modern setup. Usually, we start by carefully disconnecting the old drain pipes and hauling away the heavy materials that have been sitting there for ages.

Then we look at the plumbing lines hidden behind your walls to make sure everything stays dry and leak-free. This stage involves making sure your water pressure stays steady so you can enjoy a nice spray without any weird temperature fluctuations.

After the old mess disappears, we put in a solid pan that serves as the base for your new water area. Finally, we seal all the joints with high-quality stuff that keeps moisture from seeping into your subfloor where it does not belong.

Selecting the right style for your home

Since you live in a place where median household income varies, we work with you to pick materials that fit your budget while still looking sharp. Whether you want glass doors that let light flow through or simple curtains, the choice remains yours to make.

Maybe you prefer a minimalist look with neutral colors or something bold that stands out when guests visit your place. Because we handle the labor, you can focus on picking out the tiles and hardware that match your personal taste perfectly.

This level of customization provides a sense of repose that cheap off-the-shelf kits just cannot offer. You gain a durable, low-maintenance surface that cleans up fast so you spend less time scrubbing and more time relaxing.

ComponentBenefit to You
Low Entry PointNo more tripping hazards
Non-Slip FloorSuperior safety for everyone
Glass EnclosuresMakes the room feel larger
Modern FaucetsBetter water flow control

Considering the layout of your room

Now that you think about your current setup, look at where your plumbing sits in relation to the rest of your fixtures. Moving pipes can cost extra, but keeping them where they are saves you money and keeps the job moving along quite fast.

Because this is a specific modification, we make sure the slope of the floor drains perfectly toward the outlet. This prevents standing water from hanging around after you finish your rinse, which helps keep your bathroom fresh and dry.

Most homeowners in the 67420 ZIP code area find that this specific project adds real value to their property. Even if you plan to stay in your home forever, having a modern bathroom makes your daily life feel much more polished.

Practical advice for your renovation

Whenever you decide to start a project like this, check your available space and think about where you want your shelves. Adding built-in niches for your soap and shampoo keeps your bottles off the floor and makes your shower look tidy.

Making it work for your lifestyle

If you have mobility issues, you could add grab bars that provide extra stability without looking like a hospital room. These accessories offer a sense of comfort and help you feel secure while you enjoy your morning wash.

On the other hand, you might want a rainfall style shower head that turns a quick rinse into a mini vacation. Getting this right means you stop dreading the early alarm clock because your shower feels like a reward instead of a chore.

When you hire a pro to handle the heavy lifting, you avoid the headache of dealing with weird pipe sizes or uneven walls. We bring the tools and the know-how to ensure your new space looks professional and functions flawlessly for years.

Requesting your free estimate today

Since you want to know what this costs before committing, we offer a free estimate to look at your specific bathroom. We come out to your property, measure the area, and talk through the options that work best for your home.

This lets you see exactly how much work we need to do so you can plan your budget without any surprise costs. We pride ourselves on being straightforward about what we can achieve for your home in this part of Kansas.

Because our team values honesty, we never try to sell you things you do not need or want. You get a fair price for quality work that transforms your home into a place of true repose and satisfaction.

Taking the next step

Since you have read this far, you probably have a pretty clear idea of how this change would improve your home. There is nothing like the feeling of walking into a clean, modern bathroom that meets your needs perfectly.

What happens when you reach out

When your request comes in us for your free quote, we arrange a time that fits your schedule so we can see the space. We look at the current basin, the existing pipes, and the wall structure to give you an accurate number.

You can ask us anything about the materials, the timeframe, or the way we handle the mess during the construction phase. We believe in keeping you informed so you feel good about every decision you make regarding your living space.

On top of that, we clean up after ourselves so your house does not stay in disarray while we work. We want you to enjoy your new room as soon as possible, so we work efficiently to get things finished.

Why choose local service

Being part of the community means we care about the work we do for our neighbors. You get friendly service from people who understand the local housing styles and the unique challenges of renovating homes in this region.

Whether you live in a house you just bought or a place you have held for decades, this upgrade makes sense. It simplifies your life and clears out the clutter of an old, unused tub that just takes up space.

Now that you have the info you need, why wait any longer to make your home better? Reach out today to get your free estimate and start planning your project. Your perfect bathroom is much closer than you think.

Why the tub goes in Ada

Count the baths your household actually ran last year. In most homes we visit, the honest number is somewhere between zero and three, and yet every single morning somebody swings a leg over fifteen inches of porcelain rim to stand up and shower inside a fixture built for lying down. The tub charges rent daily and works a few evenings a year.

Nothing dramatic follows from that. Nobody is in danger because a bathtub exists, and if long soaks are part of your week, keep the tub and enjoy it with our blessing. The case for the conversion is plainer: when the tub has become a shower tray with high sides, you are paying, in caution and in cleaning, for a feature you retired years ago.

The swap itself is smaller than most people picture. The supply lines, the drain and the alcove walls are already exactly where a shower wants them, which is why this is a job measured in days. We are not building a new bathroom; we are letting the one you have stop pretending it still gives baths.

Three days, wall to wall in Ada

The same alcove, photographed the way the week actually unfolds. Weather never delays this one; it all happens indoors.

Day one

Out with the tub, in with the rough plumbing

Floors along the hallway get covered, the water goes off for a few hours, and the bathtub is cut free and carried out, tile flange and all. With the alcove stripped, the plumber moves the drain to where the new pan wants it and sets the new valve at shower height. By supper the room is bare, clean and ready.

The old bathtub cut loose and carried out of the alcove
The old bathtub cut loose and carried out of the alcove
Drain and valve reworked in the open alcove
Drain and valve reworked in the open alcove
Day two

The pan goes down, the walls go up

The base arrives first: an acrylic pan set dead level on a mortar bed, or a sloped, waterproofed floor when the plan says curbless. Then the walls close in, either grout-free panels bonded in a single afternoon or backer board ready for tile. Everything from here on is watertight before it is pretty.

A low curb shower pan bedded level in the alcove
A low curb shower pan bedded level in the alcove
Wall panels closing over the waterproofed alcove
Wall panels closing over the waterproofed alcove
Day three

Glass, silicone and the first shower

The glass panel or door is drilled, hung and plumbed straight, the trim goes on, and the silicone lines are drawn last. Silicone wants a day to cure, so the first shower usually happens the following morning, which is exactly how we schedule the walkthrough.

The fixed glass panel being set beside the opening
The fixed glass panel being set beside the opening
The finished shower standing where the bathtub was
The finished shower standing where the bathtub was

Low curb or no curb in Ada

Both are real showers in the same alcove. The difference is the entry, and what has to happen under it.

What you weighLow curbCurbless
What stands at the entryA tidy threshold about 3 to 4 inches tallNothing. The bathroom floor rolls straight into the shower
Cost, installedThe friendlier bracket, most jobs land hereRoughly a third to a half more, the floor is rebuilt
What the crew rebuildsThe alcove only; the bathroom floor stays shutPart of the bathroom floor, sloped and waterproofed
Water containmentThe curb and glass do the holdingThe slope and a linear drain do the holding
Suits bestStraight swaps on a budget and upstairs bathroomsWheels, walkers, and anyone planning to stay put for decades

Undecided is a fine answer on the form. The site visit settles it with a tape measure, not a sales pitch.

What we do while the bathroom is ours in Ada

The tub leaves whole or in pieces

Removal

The tub leaves whole or in pieces

Cut free, hauled out and off to recycling, with floors and doorways shielded on the way. The loudest hour of the conversion, and it wraps before most jobs have begun.

Drain, trap and valve reset

Plumbing

Drain, trap and valve reset

Tub drains sit at one end; showers drain where the pan says. We move what needs moving and swap the old valve for a pressure-balanced one.

Pan or sloped floor

The base

Pan or sloped floor

A level acrylic pan for most swaps, a mortar-built sloped floor for curbless plans. Either way it is tested with water before anything covers it.

Panels or tile, sealed tight

The walls

Panels or tile, sealed tight

Grout-free panels go up in an afternoon and wipe clean forever. Tile takes longer, costs more, and looks like whatever you can imagine.

Panel or door, hung plumb

The glass

Panel or door, hung plumb

A fixed panel keeps things open and easy to clean; a hinged door closes the warmth in. Both are tempered, both are set dead straight.

Trim, silicone and handover

The finish

Trim, silicone and handover

Shelving, the hand shower, clean caulk lines and a walkthrough. We leave the cure time in writing so the first shower is not a gamble.

What the swap costs in Ada

The jobUsual rangeInside the number
Standard tub-to-shower conversion$3,100 - $5,600Tub out, low curb pan, wall panels, new valve, glass panel.
Curbless conversion$4,900 - $8,800The floor is rebuilt flush and sloped to a linear drain.
Glass: fixed panel or hinged door$450 - $1,400A single panel sits at the low end, a framed door at the top.
Walls: PVC panels or tile$1,100 - $3,900Panels finish in a day; tile adds days and takes any look you want.
Tear-out only$450 - $950The tub gone and the alcove left clean for another trade.
Small job minimumaround $2,400Even the simplest swap books a licensed plumber and a full crew.

Wall condition, drain position and the glass you choose move every line. The visit pins the figure down, and the figure then holds.

What your plumber will find

A bathtub drains at one end through its own trap; most showers want the drain nearer the middle, or along one edge when the plan is curbless. Sometimes the existing trap is close enough to reuse and sometimes it has to travel a foot or two, which means opening a strip of floor. We can usually tell which from the basement or the crawl space during the visit, and the paperwork you sign already names which one you are getting.

Houses older than the seventies like to add a surprise: galvanized supply lines rusted nearly shut, a cast iron trap that crumbles at a touch, or framing that got damp decades ago and kept it quiet. None of it is rare and none of it is ruinous, but it is your call, not ours. When something like that turns up, work pauses, you get photographs and a price for the fix, and nothing is billed until you have said yes to it. A conversion should never be the job where the invoice writes itself.

Asked before the demo bar comes out

QIs losing the only bathtub a resale mistake?

AAgents around Ada repeat one rule: a family house shows better with a tub somewhere in it. If this is your only tub and small children are in your plans, we put that on the table during the visit and you decide with open eyes. If another bathroom keeps its tub, or the buyers you expect are shower people, the argument evaporates.

QHow long do we go without washing?

AThe toilet and sink stay usable every evening, and the water is only off for stretches on day one. The shower itself is ready once the silicone cures, so figure on missing roughly three days of showers at home. Plenty of clients time the job before a weekend away.

QDoes all the old tile come off the walls?

AOn the alcove walls, yes, because the new waterproofing needs to start from the studs, not from forty-year-old grout. Tile outside the alcove stays put, and we cut a clean line where the two meet.

QCan the new shower use the tub drain?

AThe pipe itself is nearly always reusable; the position is the question. A low curb pan can often sit its drain within reach of the old trap. Curbless floors want a relocated or linear drain, and that difference is priced before demo, never discovered after.

QDo we need a permit for the swap?

AA like-for-like fixture swap usually rides on a simple plumbing permit, and moving the drain can add an inspection. We file whatever your jurisdiction wants and fold the cost into the written price.

QWhat if there is rot behind the tub?

AIt happens, mostly around the old tile flange. You get photographs the hour we find it, a firm price for the repair, and the choice to proceed or pause. The framing fix is usually a morning, not a remodel.

Streets and showers near Ada

The map carries the geography; the link lists underneath spell out every town our crews can reach from this one.

Ada in short

StandingIncorporated place
Population139
Land area2.5 sq mi
Density55 per sq mi

For the bigger map: county seat pages start at Ottawa County; the statewide picture lives on Kansas; the wider region is the Midwest; background reading sits on Wikipedia.

Bathrooms we convert around Ada

Conversions booked across Kansas

One three-day job stands between this bathroom and its best fixture.

Get my free quote